Previous Davco Grout 180 ECO Non-Shrink Grout
DREB Tile Fix 6001 (White)
DREB Tile Fix 6001 (White)
DREB Tile Fix 6001 is a high-performance tile adhesive formulated for installing ceramic tiles, porcelain, and natural stone on both walls and floors. It provides excellent bonding strength, making it suitable for interior and exterior applications, including areas exposed to moisture like bathrooms and kitchens.
Packaging
- 25kg
- 40kg
Uses
Use to lay tiles, marbles or natural stones onto concrete render, block work, and rendered brickwork surfaces. Can be used on walls and floors in both interior and exterior applications.
Benefits
- Approved by Singapore Eco label authorities.
- Environmental friendly.
- Soaking of tiles in water before installation is not required.
- Water resistant, can be used in toilets, kitchens, etc.
- Excellent bond strength and workability.
- Consistent quality.
- Anti-sagging.
- Convenient In placing, handling, mixing and application.
Pot Life
Approximately 30 - 40 minutes after mixing
Shelf Life
Shelf life up to 12 months from the date of production. It must store In dry place free from moisture contact in original sealed packing.
Direction of Use
Surface preparation
All surface of substrates should be clean and remove from oil, grease, dust and others contaminants. Dry substrates should be dampened before application. For old worn out concrete substrates, the surface should be hacked off and buttering with bonding agent before applying them.
Mixing
Mixing should use the clean water and mix thoroughly using a hand-held or mechanical mixer for 3-7 minutes until a desire homogenous mix is achieved and ensure the mix is free from lumps. The mix ratio is add approximately 5.0 - 6.0 litres of clean water to 40 kg bag.
Coverage
Coverage varies according to surface condition and the build-up required. The following can be used as an approximate guide: - Using a 4.5mm x 4.5mm notched trowel, approximately 2 kg/m2 - Using a 6mm x 6mm notched trowel, approximately 2.5 kg/m2 - Using a 10mm x 10mm notched trowel, approximately 3.5 kg/m2
Application method
Apply them by use a steel trowel, wooden/steel float while the mix is still workable for application onto the substrate and concrete. It should be cured for at least 1 day (24 hours) before any tiling works.
